|
Kenny's Model Tanks were the first to start producing
after market metal tracks for 1/15 and 1/16 RC tanks.
Now they have shown the way forward once more, with the
introduction of an improved pin locking system which
other manufacturers are sure to adopt.
 Kenny's
new system involves the use of pins with heads slightly
larger than the hole in the track link by .2 mm which
enables them to be press fitted to form a tight friction
hold, the beauty of this system is that the pin can be
removed without too much difficulty or breaking the link
This pin locking system has been introduced on all
Kenny's tracks from now on. Sets of pins are also
available separately ...
PANZER III and IV TRACKS
 These
Panzer III tracks are now available with the extra
length required for the Tamiya and Heng Long Panzer IV
RC tanks. As you can see, they are well cast, with
hollow guide horns, a detail not present on some cheaper
metal tracks.
EARLY PANZER III METAL SPROCKETS AND IDLERS
Suitable for the Heng Long tanks. Provided for reference
are Heng Long Panzer III idlers and sprockets next to
Kenny's .
 OTHER
KENNY KONG TRACKS
Kenny also sent along some samples of his other tracks
with the new pin system installed which you can see in
the photos. *New King Tiger Transport Tracks
Similar to the King Tiger transport tracks already
reviewed,
but with flat connector links.
|
*Tiger 1 Tracks |
 |
|
*T-81 Pershing Tracks |
 |
|
*T-66 Sherman Tracks
|
 |
|
